EPO waterproof coating series


GERMANY VESCHKO

EPO-CS Emulsion

Uses 

• As the base surface protection layer 

• On EPO-MR Waterproofing System 

• On EPO-CR Waterproofing System 

• On EPO-SR Waterproofing System 

• On EPO-PR Waterproofing System 

• On damp and dry substrates (e. g. screed, concrete, etc.) 

• As a coating for : 

- Metal roof, external wall, basement 

- Balconies and terraces 

- Corridors 

- Shops, halls and cellars

Features 

EPO-CS is a one-component coating applied to the surface of a building base.

Hardening 

EPO-CS Hardener is used for curing. The quantity added to 10 kg EPO-CS depends on the temperature.

Material-

Hardener

Hardener

Pot life in 

Surface

Temperatur

quantity

quantity

pack

cured

e

[100 g

[%]

[min]

[min]

[°C]

bags]

 

 

 

 

 

 

 

 

+ 5

4 bags

4 %

35

70

 

 

 

 

 

+ 10

4 bags

4 %

30

60

 

 

 

 

 

+ 20

2 bags

2 %

20

35

 

 

 

 

 

+ 30

1 bag

1 %

20

30

 

 

 

 

 

 

Composition 

EPO-CS applied to any surface of base building, enhanced repair building grassroots.

Important notice  

For chemical resistance, see the Chemical Resistance List A-Z.

The safety data sheets, identification of the units, hazard warnings and safety recommendations on the units must be observed during transportation, storage and application. The BG-Chemie technical information must be observed for application.

  

Pack sizes 

5kg

Shelf Life 

Can be stored unopened for up to 6 months in a cool, dry, frost-free place

Properties 

Form

liquid

Colour

 Pale brown

Workability period* [min]

approx. 20

(2 % EPO-CS Hardener)

 

Rainproof* after [min]

approx. 35

Can be walked on* after [min]

approx. 35

Next coat can be applied after* [min]

approx. 60

Withstands poured asphalt after [h]

approx. 24

Temperature resistance [°C]

210

 

* Values obtained at a temperature of 20 °C - 50 % rel. humidity. May vary according to weather conditions such as wind, humidity and temperature.

Application 

Base surface pretreatment:

Base surface must be solid and clean, no dust, oil or debris. Base surface such as broken, loose or uneven, after cleaning can be cleaned EPO waterproof anti-corrosion mortar (EPO-CS) for smoothing. Plane construction should follow the direction of drainage with polymer mortar or EPO waterproof coating to do slope.

Instructions:

Stir well before using. If you feel the use of brushing difficult, according to the situation plus 5% -15% water dilution, and stir evenly. Can be roller, brush and spray method of construction. General requirements four times waterproof construction, after the first pass coating dry film before the second track construction.

Precautions:

Should be in the appropriate degree of environmental temperature construction.

Is expected within 24 hours of precipitation and wind dust weather should not be outdoor construction.

Do not immediately use the paint is strictly prohibited to add water dilution, reclaim cover immediately after the lid to prevent moisture evaporation and crust.

  The same facade is best to use a batch of products, different batches of products for the same facade, should be mixed evenly after use to avoid color.

Remark 

High temperature stability, can reach 210℃, 0.5 hours does not flow; 100℃ 4 hours without sticky.

General information 

The times given are reduced with higher and increased with lower surrounding and work surface temperatures.

We guarantee the consistent high quality of our products.

VESCHKO products must not be mixed with other manufacturers′ products.

The technical information and application instructions contained herein reflect the current level of knowledge and experience with our products. In each case, the new edition supersedes the previous technical information and renders it invalid. It is therefore necessary that you always have to hand the current code of practice. When using our products, a detailed, object-related and qualified inspection is required in each individual case in order to determine whether the product and / or application technology in question meets the specific requirements and purposes. We are liable only for our products being free from faults-correct application of our products therefore falls entirely within your scope of liability and responsibility. Our products are sold exclusively on the basis of our conditions of sale and delivery.

Published: VESCHKO January 2007

______________________________________________________________________________________________________________


 GERMANY VESCHKO IHL Co.   www.veschko.com · Certified according to DIN EN ISO 9001:2000 and DIN EN ISO 14001